- Products
- Rice Transplanter
- NSPU-68C
- Specifications
| Model | NSPU-68C | |||
|---|---|---|---|---|
| Drive type | 4-wheel drive | |||
| Dimensions | Overall length ( mm{inch} ) | 3000{118.11} | ||
| Overall width ( mm{inch} ) | 2210{87.01} | |||
| Overall height ( mm{inch} ) | 2570{101.18} | |||
| Minimum ground clearance ( mm{inch} ) | 430{16.93} | |||
| Weight ( kg ) | 590 | |||
| Engine | Model | GZ460-P-CHN | ||
| Type | Water-cooled, 4-cycle, 2-cylinder OHC gasoline engine | |||
| Total displacement ( L {cc} ) | 0.456 {456} | |||
| Outputlrevolutlon speed ( kW {PS} / rpm ) | Output/revolution speed (kW{PS) / rpm) 8.5 {11.5} / 3600 MAX [12.5 {17.0}] |
|||
| Applicable fuel | Unleaded gasoline for automobile | |||
| Fuel tank capacity ( L ) | 17 | |||
| Starting system | Starter motor | |||
| Battery | 12V, 24Ah [34A19L] | |||
| Fuel consumption ( kg/h㎡ ) | 3.6 to 8.5 | |||
| Traveling portion | Steering system | Integral power steering | ||
| Wheel | Type | Front wheel | No-puncture tire | |
| Rear wheel | Rubber lug wheel with thick rim | |||
| 00 x width | Front wheel(mm{inch}) | 650{25.59} x 95{3.74} | ||
| 00 x rim width | Rear wheel(mm{inch}) | 900{35.43} x 50{1.97} | ||
| Tread | Front wheel(mm{inch}) | 1165{45.87} | ||
| Rear wheel(mm{inch}) | 1200{47.24} | |||
| Shifting system | Hydrostatic transmission HST | |||
| Number of shifting positions | HST Main shift: Variable speeds for forward and reverse: No clutch [sub shift: 2 positions] |
|||
| Planting portion | Planting system | Rotary, forced planting | ||
| Number of planting rows | 6 | |||
| Distance between rows ( cm ) | 30 | |||
| Hill space ( cm ) | *12,14,16,18,21 | |||
| Planting depth ( cm ) | *2 - 5.3 [5 positions] | |||
| Number of hills per 3.3㎡ | *90,80,70,60,50 | |||
| Number of seedlings per hill | Crossfeed distance(mm{inch}/times) | *11{0.43}/26,14{0.55}/20,16{0.63}/18 [3 positions] | ||
| Vertical taking quantity(mm{inch}) | *8{0.31} to 18{0.71} | |||
| Seedling condition | Seedling type | Seedling mat | ||
| Seedling height ( cm ) | 8 to 25 | |||
| Number of leaves ( leaves ) | 2.0 to 4.5 | |||
| Operation speed ( m/s ) | 0 to 1.62 | |||
| Operation efficiency estimated value ( a/h {min/10a} ) | Max. 61 {9.8} | |||
* Kubota reserves the right to change the specifications without notice.
Long Longitudinal Feed Belt
The secure action of the long Longitudinal Feed Belt feeds seedlings longitudinally even when transplanting takes place at a high-speed range. It contributes to the Transplanting Claws securely picking up and planting seedlings in such a way as to help prevent fluctuations in the amount of transplanted stock as well as the unintentional loss of stock.
Crossfeed Time Changeover
The frequency for the Transplanting Claws to pick up seedlings as they are horizontally fed is freely set to any of three stages. In fact, only a simple movement of the Crossfeed Time Changeover Lever makes changeovers as easy as possible. In this way it becomes possible to transplant a broad scope of seedlings ranging from tiny ones up to large ones with relatively advanced leafage.
Center Mascot Line Marker
Lining up the Center Mascot to the line made by using a marker permits easily performing straight forward transplanting.
Operating Panel
Operating conditions, the status of various mechanical functions, and the warning alarms are revealed simply by glancing at the Operating Panel.
Optional
Line Marker